summer banner

Tuesday, January 4, 2011

How to use Spray Adhesive

How to use Spray Adhesive
Working with spray adhesive can be tricky and as we all know, very messy.  Here are some helpful tips and techniques from http://www.glueplace.com that will make using spray adhesive easier, cleaner and enable you to get the most out of the product.

V&S and Dan Tack Spray Adhesives from http://www.glueplace.com is one of the most useful and versatile tools for home decorating, crafting, construction and quick household fixes. It is easy to use, dries quickly and yields professional results for practically any project you can think up. 

1.         Use only in a well-ventilated area.
2.         Make sure surfaces are free of dirt, grease and moisture.
3.         Shake can well before use.
4.         If possible, mask off any area not applied with adhesive (this will also help in clean-up).
5.         Hold can upright about 6" to 8" away from surface.
6.         Test spray pattern in a protected area away from project surfaces.
7.         Spray with a light, uniform coat.
8.         When can I make the bond?  Best way is to test with your fingers.  If it feels sticky, but doesn’t transfer to your  fingers, it’s ready to bond.    
9.         To help prevent clogged nozzles after use, tip can upside down and spray until adhesive does not emit.
 

1 comment:

  1. Thanks for sharing this post with us...its really very nice and use full information....Super Glue or Cyanoacrylate.

    ReplyDelete